Welcome to D-FAN !

Company News:
About Us
Product Categories

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China
Tel: +86-769-83660708
Fax: +86-769-83660718
Email: info@d-fan.com.cn


Chiefly Choice co.,Ltd.
Add: 3rd Floor, NO.340 Kangning Street, Xizhi City, Taipei, Taiwan
Tel: +886-2-2692-6816
Fax: +886-2-2692-7030
Email:  james@chiefly-choice.com
Website: www.chiefly-choice.com

Korea Company: CHANG SHIN E&T
Add: #1113, Hanshin IT Tower,272,Digital-Ro, Guro-Gu, Seoul, Korea
Tel: +82-2-6093-6788 
Fax: +82-2-6093-8972
Phone: +82-10-6656-0330
E-mail: cs@csfan.co.kr
Contact: Junhong Kang(Mr. Kang)

      Guangzhou Office
      Tel: +86-20-85651751
      Fax: +86-20-38669584
      Room 909Guaner Yongtai building, Congyun Road No.810,
      Baiyun District of Guangzhou,Guangdong,China

   Add: 603#,NO.395 Tangdenan Rd, Tianhe District,
    Guangzhou, China


You are here:Home > news

Micro Cooling Fan power telemetry

Time:2014-12-17 Click:456Times

The correct use of "Micro Cooling Fan" telemetry end of the power of many high-current power supply has telemetry terminal (+ S, -S). Telemetry allows the power supply terminal is connected via an internal adjustment circuit test line and load, which affects the large current line drop compensation effect of load values. Figure 9-20 shows a proper connection with the load-side power telemetry. Figure test line and a large current load line separation, telemetry end direct detection voltage across the load. If high-current load line has 0.5V voltage drop through telemetry end, the internal power supply circuit to adjust the output voltage increase 0.5V line drop compensation, "Micro Cooling Fan" to ensure that the voltage rating of the load. General Power line drop compensation can load about 1.0V. This improved method is to use the power supply output voltage across the load to maintain an accurate voltage value. Telemetry cable end and the load should be shielded to avoid electromagnetic interference inside the power supply adjustment circuit. "Micro Cooling Fan" in the internal power supply, there is usually a resistor (see Figure 9-20) telemetry between the terminal and the power output, such as telemetry end due to carelessness and not connected to the load side, this resistance prevents the output voltage rise too high. If you do not have telemetry end, respectively, and the power supply should be positive and negative terminals shorted, then the power to work in the local detection.


Tel: +86-769-83660708

Fax: +86-769-83660718


URL: /eng/

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China

Follow Us

Main Products: DC Fan|Cooling Fan|AC Fan|Axial Fan|Cross Flow Fan|Exhaust Fan|Blower Fan|DC Axial Fan|DC Cooling Fan

Copyright©2014, DONGGUAN XINGDONG ELECTRONICS CO., LTD., All Rights Reserved. Tel:+86-769-83660708,,Fax:+86-769-83660718 E-mail:info@d-fan.com.cn

XML 地图 | Sitemap 地图