Welcome to D-FAN !

Company News:
About Us
Product Categories

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China
Tel: +86-769-83660708
Fax: +86-769-83660718
Email: info@d-fan.com.cn


Chiefly Choice co.,Ltd.
Add: 3rd Floor, NO.340 Kangning Street, Xizhi City, Taipei, Taiwan
Tel: +886-2-2692-6816
Fax: +886-2-2692-7030
Email:  james@chiefly-choice.com
Website: www.chiefly-choice.com

Korea Company: CHANG SHIN E&T
Add: #1113, Hanshin IT Tower,272,Digital-Ro, Guro-Gu, Seoul, Korea
Tel: +82-2-6093-6788 
Fax: +82-2-6093-8972
Phone: +82-10-6656-0330
E-mail: cs@csfan.co.kr
Contact: Junhong Kang(Mr. Kang)

      Guangzhou Office
      Tel: +86-20-85651751
      Fax: +86-20-38669584
      Room 909Guaner Yongtai building, Congyun Road No.810,
      Baiyun District of Guangzhou,Guangdong,China

   Add: 603#,NO.395 Tangdenan Rd, Tianhe District,
    Guangzhou, China


You are here:Home > news

Micro Cooling Fan blade tip clearance

Time:2014-12-2 Click:411Times

How to adjust the "Micro Cooling Fan" gap exists between the fan and the fan frame design is a major problem. Here the gap is too small will make the airflow and the blade, frame friction, noise increases; the gap is due to the increased air flow and other effects flyback ear reduce fan efficiency - the gap increases by 1%, the total pressure drop of about 2% power . Blade spacing: the distance between the blades is too small, will result in flow disturbances, increasing the friction surface of the blade, reducing the efficiency of the fan; the distance between the blades is too large, it will lead to increase in pressure loss, lack of air pressure. Spindle diameter: Due to the motor and bearings, the central part of the axial flow "Micro Cooling Fan" Spindle where certain non-blind inevitably flow through the spindle diameter will determine the size of this blind spot. Spindle diameter size depends mainly on the power of the fan motor - powerful motor stator winding need more, must take up more space, without being able to scale up (increasing the height), it would have to scale (increasing the area). Although the "Micro Cooling Fan" of the blade section from the same base curve and more, can make various adjustments also are limited within a certain range, but there are some manufacturers have made great improvements made very distinctive design.


Tel: +86-769-83660708

Fax: +86-769-83660718


URL: /eng/

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China

Follow Us

Main Products: DC Fan|Cooling Fan|AC Fan|Axial Fan|Cross Flow Fan|Exhaust Fan|Blower Fan|DC Axial Fan|DC Cooling Fan

Copyright©2014, DONGGUAN XINGDONG ELECTRONICS CO., LTD., All Rights Reserved. Tel:+86-769-83660708,,Fax:+86-769-83660718 E-mail:info@d-fan.com.cn

XML 地图 | Sitemap 地图