Welcome to D-FAN !

Company News:
About Us
Product Categories

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China
Tel: +86-769-83660708
Fax: +86-769-83660718
Email: info@d-fan.com.cn


Chiefly Choice co.,Ltd.
Add: 3rd Floor, NO.340 Kangning Street, Xizhi City, Taipei, Taiwan
Tel: +886-2-2692-6816
Fax: +886-2-2692-7030
Email:  james@chiefly-choice.com
Website: www.chiefly-choice.com

Korea Company: CHANG SHIN E&T
Add: #1113, Hanshin IT Tower,272,Digital-Ro, Guro-Gu, Seoul, Korea
Tel: +82-2-6093-6788 
Fax: +82-2-6093-8972
Phone: +82-10-6656-0330
E-mail: cs@csfan.co.kr
Contact: Junhong Kang(Mr. Kang)

      Guangzhou Office
      Tel: +86-20-85651751
      Fax: +86-20-38669584
      Room 909Guaner Yongtai building, Congyun Road No.810,
      Baiyun District of Guangzhou,Guangdong,China

   Add: 603#,NO.395 Tangdenan Rd, Tianhe District,
    Guangzhou, China


You are here:Home > news

Solve Micro Cooling Fan noise method

Time:2014-11-8 Click:426Times

1, use a small brush or damp cloth "Micro Cooling Fan" dust, cleaning dust, cardboard isolated power supply circuit board and after a good fan, wipe clean, you can use Paper Tiger blowing fan blades and bearings in the plot dust.
2, do not use normal lubricants used on cars, and finally install the rubber sealing sheet, be sure to use a computer dedicated lubricating oil or advanced lightweight sewing machine oil, labeled.
3, the sound if the power supply "Micro Cooling Fan" issued by large power box is the easiest to build dust. General every six months the fan removed, wash the dust processing point lubricant for easy maintenance. As the power supply fan is sealed in the box, the assembly is not easy, so be sure to pay attention to methods of operation.
4.Unplug the power behind the input, output cord, then unplug it and connect all parts of the power connector, first disconnect the host power supply, remove the power supply box fixing screws, remove the power supply box. Observe the power box appearance of the structure, with reasonable accuracy Remove the screws, remove the cover. When removing the wires should cover the gap at the same time to pry out. Remove the retaining "Micro Cooling Fan" of four screws, remove the fan, you can temporarily welded under two power cords.


Tel: +86-769-83660708

Fax: +86-769-83660718


URL: /eng/

Address:LiShi Industrial Zone, QiaoLi Village, ChangPing Town,DongGuan City, GuangDong 523586, China

Follow Us

Main Products: DC Fan|Cooling Fan|AC Fan|Axial Fan|Cross Flow Fan|Exhaust Fan|Blower Fan|DC Axial Fan|DC Cooling Fan

Copyright©2014, DONGGUAN XINGDONG ELECTRONICS CO., LTD., All Rights Reserved. Tel:+86-769-83660708,,Fax:+86-769-83660718 E-mail:info@d-fan.com.cn

XML 地图 | Sitemap 地图